
Roofing manufacturers provide care instructions for their specific shingle products, and cleaning methods should follow those instructions. High-pressure washing and abrasive scrubbing can dislodge protective granules or damage shingles, so avoid using them unless the manufacturer expressly permits the method.
In Surrey, wet weather and shaded roof areas can encourage moss and algae growth. The right cleaning method depends on the shingle manufacturer’s guidance, the type of growth, and the roof’s condition. Because roof surfaces can be slippery and cleaning solutions can affect plants, consider these risks before deciding whether to hire a professional.
Roof cleaning can be safe when the method and products are appropriate for the shingle type and follow manufacturer guidance. High-pressure washing can dislodge protective granules and force water beneath shingles, potentially contributing to damage.
Roof cleaning can damage asphalt shingles if the method, pressure, tools, or chemicals are unsuitable for the product or roof condition. Asphalt shingles consist of a fibreglass base mat coated with asphalt and surfaced with ceramic-coated mineral granules. When harsh cleaning methods dislodge these granules, the shingles lose some of their protection against sun and weather.
Roof cleaning can be harmful if unsuitable methods, such as power washing, stiff wire brushing, or the wrong chemicals, are used. A suitable low-pressure treatment may help control moss and algae while reducing the risk of mechanical damage, but results depend on the product and application.
Primary causes of shingle damage during improper roof maintenance include:
Soft washing generally uses lower water pressure and a cleaning solution rather than forceful water jets. It may reduce the risk of dislodging granules, but the solution and process still need to be suitable for the specific shingles and used according to manufacturer instructions.
Soft washing may be suitable for asphalt shingles when the cleaning solution and application method follow the manufacturer’s instructions. No cleaning method is risk-free; incorrect chemicals or application can still damage roofing or nearby plants.
Pressure washing is generally not recommended for asphalt shingles because the force can remove protective granules or drive water under the shingles. Follow the specific manufacturer’s cleaning instructions.
Ceramic granules serve critical protective roles for asphalt roofing:
Low-pressure cleaning applies a solution without relying on a forceful jet. The appropriate pressure and solution depend on the product instructions and the condition of the roof; low pressure reduces, but does not eliminate, the risk of damage.
Primary benefits of low-pressure soft washing include:
Moss, algae, and dark streaks are living growth that can affect the appearance and, over time, the condition of asphalt shingles. Dark vertical streaks are caused by Gloeocapsa magma, a blue-green algae species that feeds on the calcium carbonate limestone filler added to modern asphalt shingles. Moss can hold moisture against the shingle surface, and in cold weather it can lift shingle edges and let water back up beneath them.
The safest approach depends on the shingle manufacturer’s cleaning guidance and the roof’s condition. Some methods use a low-pressure solution to treat moss, allowing it to loosen over time; do not assume a particular chemical concentration is suitable for every roof.
|
Contaminant Type |
Primary Cause |
Damage Mechanism |
Typical Approach |
|
Black Streaks |
Gloeocapsa magma algae |
Feeds on limestone filler; causes heat absorption |
Low-pressure soft wash treatment |
|
Green Moss |
Shaded moisture accumulation |
Lifts shingle edges; traps moisture; causes rot |
Low-pressure soft wash, following manufacturer guidance |
|
Mildew / Mould |
Excessive ambient humidity |
Degrades surface appearance; holds dampness |
Low-pressure soft wash with a cleaning solution suitable for the shingles |
Where the manufacturer allows it, asphalt shingles are typically cleaned with a low-pressure soft wash process that includes protecting nearby plants. The roof’s condition should be assessed before any cleaning solution is applied; steep or damaged roofs are best left to qualified professionals.
Aggressive pressure washing, abrasive scraping, or unsuitable chemicals can shorten shingle life. Appropriate cleaning can help manage organic growth, but it does not guarantee a longer roof lifespan; roof age, installation, maintenance, and local exposure also matter.
The standard professional soft washing sequence involves specific operational steps:
Homeowners should avoid DIY roof cleaning whenever steep roof slopes, high elevations, or severe moss infestations present physical hazards. Wet roof surfaces treated with cleaning solutions become extremely slick, increasing slip and fall hazards.
Key risks associated with DIY roof cleaning include:
Roof cleaning can void a shingle warranty if the cleaning process violates manufacturer guidelines. High-pressure washing or unapproved chemical treatments may affect warranty coverage for granule loss or storm performance.
To avoid potential warranty issues, check whether the cleaning method or chemicals conflict with the shingle manufacturer’s instructions. Review the warranty and care guidance before cleaning; using an approved method does not guarantee that every warranty condition will remain satisfied.
Warranty compliance factors to keep in mind:
There is no single cleaning schedule that suits every asphalt shingle roof. Inspect your roof periodically, especially if it is shaded or surrounded by trees, and arrange cleaning when growth or debris warrants it using a method approved for the shingles.
Cleaning frequency depends on shade, nearby trees, roof condition, and the amount of moss or algae. In Surrey, periodic inspections can help identify growth early; clean only when needed and in line with the manufacturer’s guidance.
Factors that dictate cleaning frequency include:
Roof cleaning costs in Surrey, BC vary with roof size, pitch, access, cleaning method, and the amount of moss or algae. Request a written quote after the roof is assessed.
Cost varies with roof size, pitch, access, and the extent of growth, so request a written, site-specific quote.
How to Choose a Roof Cleaning Company
When choosing a roof cleaning company, check its credentials and insurance and ask which cleaning methods it uses. Ask the contractor which cleaning method they plan to use and how it fits the shingle manufacturer's instructions. Avoid high-pressure washing on asphalt shingles.
When looking for roof cleaning services near you in Surrey, BC, choose a qualified local contractor and ask which cleaning method they use.
Selection criteria for choosing a service provider:
Q. Can Pressure Washing Damage Asphalt Shingles?
A. Pressure washing can damage asphalt shingles by dislodging protective granules or forcing water beneath them. Whether warranty coverage is affected depends on the manufacturer’s terms and the cleaning method used.
Q. Is Soft Washing Safe for a Shingle Roof?
A. Soft washing may be suitable for a shingle roof when the method and cleaning solution follow the manufacturer’s instructions. The contractor should also protect nearby plants and manage runoff appropriately.
Q. What Happens If Roof Cleaning Removes Shingle Granules?
A. Granule loss exposes the asphalt layer to UV radiation, which can speed up ageing, cracking, or curling. If you notice heavy granule loss, have a qualified roofer assess the roof.
Q. How Much Does Professional Roof Cleaning Cost in Surrey, BC?
A. Cost depends on roof size, pitch, accessibility, and how much moss has built up. Request a written, site-specific quote.
Q. How Often Should Shingles Be Professionally Cleaned?
A. There is no one-size-fits-all schedule; clean when moss, algae, or debris warrants it, using a method that follows the manufacturer's guidance.
Q. Can Moss Damage or Shorten the Life of a Roof?
A. Yes, it can. Moss holds moisture against shingles and can lift their edges, especially in cold weather.
Q. What Should I Use to Clean Asphalt Shingles?
A. Use only a cleaning method and solution that the shingle manufacturer recommends. Chemical type, concentration, application, and dwell time should follow the product label and the roof’s specific requirements.
Q. Should I Hire a Professional Roof Cleaning Company?
A. A qualified roof cleaning company can help manage fall risks, select an appropriate method, and protect surrounding landscaping. Ask about insurance, worker safety practices, and how the contractor follows the shingle manufacturer’s instructions.
At B-Cheema Roofing, we provide roof cleaning in Surrey, BC, helping homeowners manage moss, algae, and debris on their roofs. If you’re looking for roof cleaning near me, our team can assess your roof’s condition and recommend a suitable cleaning method based on the shingle manufacturer’s guidance. We also take steps to protect nearby landscaping during the work. Contact us to discuss your roof and request an estimate.
Roof cleaning can help manage moss and algae, but the cleaning method matters. Avoid high-pressure washing and follow the shingle manufacturer’s instructions to reduce the risk of granule loss or other damage. In Surrey, inspect shaded roofs periodically and arrange cleaning when needed rather than following a fixed schedule. A qualified contractor can recommend a suitable method for your roof.